- 1 Is Briwax good for antique furniture?
- 2 What is the best way to apply Briwax?
- 3 How long do I leave Briwax before buffing?
- 4 How many coats of Briwax should I use?
- 5 Can you put Briwax over paint?
- 6 How long does Briwax last?
- 7 How do you remove Briwax?
- 8 Can I use Briwax on kitchen cabinets?
- 9 Can I put polyurethane over Briwax?
- 10 How do you soften Briwax?
- 11 What color Briwax should I use?
- 12 Can I darken wood with wax?
- 13 Can I use beeswax on bare wood?
- 14 How do you apply solid beeswax to wood?
Is Briwax good for antique furniture?
BRIWAX is a blend of beeswax and carnauba wax, two of the finest waxes known to man. BRIWAX is designed to protect raw wood and can be applied to virtually any existing finish. Use BRIWAX on all woods and works amazingly to restore antique furniture. BRIWAX cleans, stains and polishes all in one product.
What is the best way to apply Briwax?
How to Apply Briwax
- apply Briwax with a soft cloth – a small terry cloth towel works very well.
- Using the soft cloth, pick up a SMALL amount of Briwax on the cloth.
- Now, spread the Briwax onto your furniture as far as it will go – you’ll notice that the areas where Briwax has been applied will be dull.
- Work in small areas at a time.
How long do I leave Briwax before buffing?
For best results allow the Briwax to dry for about thirty minutes or so before buffing.
How many coats of Briwax should I use?
Apply Briwax Danish Oil liberally with a clean dry rag or brush. On new wood 2 or 3 coats will be necessary.
Can you put Briwax over paint?
Briwax is a blend of beeswax and carnauba wax, two of the finest waxes known to man. Briwax is designed to protect raw wood and can be applied to virtually any existing finish. Use Briwax on all woods, untreated leather, marble, concrete, metal and painted surfaces.
How long does Briwax last?
Q: How long will the shine last? A: Under normal conditions the shine will last for six to twelve months. It will lose its shine more swiftly in high wear areas or areas subjected to moisture.
How do you remove Briwax?
Briwax can be removed using mineral spirits (paint thinner). Just take a cloth, we prefer white so that you can see the wax, and dampen it with mineral spirits. Wipe the area where you wish to remove the wax and the petroleum distillate in the paint thinner will dissolve the wax and your cloth will remove it.
Can I use Briwax on kitchen cabinets?
Briwax is an excellent choice for cleaning up kitchen cabinets. The inherent solvent in Briwax will clean off the grease and the wax will fill in the scratches and leave a wonderful beeswax film on the cabinets themselves.
Can I put polyurethane over Briwax?
Briwax will work well on almost any finish be it paint, varnish, lacquer, oiled, polyurethane or wax. Some things to remember, when using Briwax. Buff Briwax out with a clean dry cloth. Every time you rewax with Briwax you will remove the old wax, so you always have a fresh new finish.
How do you soften Briwax?
The Briwax finish can be maintained by further applications which will give increased hardness and shine. This product is not recommended for use in areas where it will come into contact with water. Above 20°C, Briwax will soften and liquify. Replace lid, put in a cool place and it will return to its original state.
What color Briwax should I use?
use Clear Briwax when you wish no color on the finished item. Clear Briwax is perfect for Granite or Marble. Use Clear on Corian or other hard surfaces like ceramic tile or cultured marble. Clear Briwax is an excellent choice for table saw tops and other pieces of machinery that are subject to rusting.
Can I darken wood with wax?
Applying Dark Wax You can use a wax brush or an old tee shirt to apply the dark wax to the furniture. I used an old tee shirt and worked in small sections to massage the dark wax directly into the pine. If for some reason, you use too much dark wax you can always layer in clear wax.
Can I use beeswax on bare wood?
Unfinished wood can easily crack or split and is prone to staining from moisture or spills. We recommend beeswax polish. Firstly, using a soft clean cloth, apply the natural beeswax polish directly from the jar, applying sparingly, following the direction of the grain of the wood.
How do you apply solid beeswax to wood?
Applying the wax
- Grab a wad of the 000 steelwool and wipe it across the wax.
- Rub the steelwool over the surface of the timber in the direction of the grain, applying a very thin coat of wax as you go.
- Use your hand to warm the wax and spread it evenly if you need to.
- Add more wax to the steelwool as you need it.